Release Date: May 24 ,2017
NOTE: DCC firmware for SS/SS+ and CineDrive are stand-alone, meaning you can install firmware on the DCC to work with either the SS/SS+ or with CineDrive. The firmware on this page is for use with SS/SS+
Release notes for Kessler DCC firmware 126.96.36.199
Compatible with SS 0.3.9.1 and SS+ 0.4.8.9
Added support for 6 axes
Added support for 3 key frames
Live recording can now be started with the joystick button
Added Speed Ratio feature to Utilities
Added Damping Ratio feature to Utilities
Added Temporary Calibration feature
UPDATING FIRMWARE ON DIGITAL CONTROL CENTER
- Select 1. FIRMWARE and READY... will be shown.
- Connect the micro USB cable from the DCC to a laptop/computer. The DCC will show up as “DCC” on your laptop/computer.
- Download the latest firmware at support.kesslercrane.com. There are several files within the zip file.
- Click and drag the file “DCC.img” to the USB device titled DCC. The DCC will show UPDATING... and then REBOOTING... The DCC will reboot.The DCC is now updated and ready to use.