Second Shooter Firmware V0.3.7.5

Release Date: July, 28 2016




Change Log 

Firmware v0.3.7.5 (current release)

- Fixed bug found in v0.3.7.3 that could cause motor oscillation in pan axis

Firmware v0.3.7.3

- Required for Master / Slave mode compatibility with SS+
- Fixed potential motor runaway if a cable is disconnected



  1. Download and extract the attached zip file. There are 4 files within the zip folder. The one you need is 2ndShooter.img
  2. Plug in the power cord for the Second Shooter controller.
  3. Plug the USB cord from Computer into the micro-USB port on the controller.
  4. Once system powers up, navigate to "Settings"
  5. In "Settings", find and select “Firmware Update”, the controller will display “Firmware Update Ready…”
  6. The controller will show up as a USB device on your computer titled 2ndShooter
  7. Go to the location where you extracted 2ndShooter.img
  8. Click and Drag 2ndShooter.img to the USB device titled 2ndShooter and release.
  9. The system is now updating. The Controller’s screen will detail the update process and ask you to reboot the controller.
  10. Select "Reboot". The controller will reboot itself.
  11. As the system restarts, confirm the splash screen shows the new firmware number across the bottom.
Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request


  • Avatar
    Richard Griebno

    No Screen. Will not show up on the desktop either.