Second Shooter Plus Firmware V0.4.6.1 [Current Release]

Release Date: November, 30 2016

DOWNLOAD FIRMWARE


Change Log
 

Features and fixes applied since firmware 0.4.4.1

- Support for calibration limits via LCD/keypad UI

- Adjustable ramping (acceleration) in Manual mode

- Max speed in manual mode = max speed in programmed move

- Fast Mode support (horizontal orientation, aggressive gearing)

- Recalc run time on changes to fast/quiet mode

- Faster re-enable of LCD UI on kOS UI disconnect

- L/R UP/DN swap for slave axes

- kOS UDP support (for future development)

- All motion control now done via trapezoidal mode (support for multiple controlling devices in future)

Support for following features in kOS:

-- All variants of rapid/reverse to 1st keyframe

-- Variable # of live motion loops

-- Pause/resume

-- External trigger

-- Camera Roll/LANC cable

 

 

UPDATING FIRMWARE ON SECOND SHOOTER PLUS

  1. Download and extract the attached zip file. There are 2 files within the zip folder. The one you need is SecondShooter+.img
  2. Plug in the power cord for the Second Shooter Plus controller.
  3. Plug the USB cord from Computer into the micro-USB port on the controller.
  4. Once system powers up, navigate to "Settings"
  5. In "Settings", find and select “Firmware Update”, the controller will display “Firmware Update Ready…”
  6. The controller will show up as a USB device on your computer titled SSPLUS
  7. Go to the location where you extracted 2ndShooter.img
  8. Click and Drag SecondShooter+.img to the USB device titled SSPLUS and release.
  9. The system is now updating. The Controller’s screen will detail the update process and ask you to reboot the controller.
  10. Select "Reboot". The controller will reboot itself.
  11. As the system restarts, confirm the splash screen shows the new firmware number across the bottom.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk