Second Shooter Plus Firmware V0.4.9.29 [ Current Release]

Release Date: June 7, 2021


NOTE: Apple computers with an M1 chip may see a warning on screen when the controller is connected to the computer.  You can click ignore on this message.  



Change Log 

Release notes for Second Shooter Plus firmware


  • Added support for wifi client mode.
  • Added hot-key to enable/disable client mode through the front panel within the WiFi Settings screen. (double-click right PAN/FOCUS arrow button)
  • Various bug fixes and performance improvements



  1. Download and extract the attached zip file. There are 2 files within the zip folder. The one you need is SecondShooter+.img
  2. Double check that Wifi is disabled on the Second Shooter Plus Controller.
  3. Plug in the power cord for the Second Shooter Plus controller.
  4. Plug the USB cord from Computer into the micro-USB port on the controller.
  5. Once system powers up, navigate to "Settings"
  6. In "Settings", find and select “Firmware Update”, the controller will display “Firmware Update Ready…”
  7. The controller will show up as a USB device on your computer titled SSPLUS
  8. Go to the location where you extracted 2ndShooter.img
  9. Click and Drag SecondShooter+.img to the USB device titled SSPLUS and release.
  10. The system is now updating. The Controller’s screen will detail the update process and ask you to reboot the controller.
  11. Select "Reboot". The controller will reboot itself.
  12. As the system restarts, confirm the splash screen shows the new firmware number across the bottom.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request