*Shuttle Dolly End Clamps w/ Feet are included in Shuttle Dolly Bundles. They are used on the end of the rails that the Shuttle Dolly cart rides along. They ensure that the rails are spaced properly for use with the Shuttle Dolly as well as provide multiple ¼”-20 and ⅜”-16 threaded holes for adding supports or mounting accessories. They also have flip-up belt clamps built into them for use when motorizing the Shuttle Dolly. Adjustable rubber feet at the bottom allow for low, ground setups and leveling the rails.
Shuttle Dolly Basic Center Rail Support
Shuttle Dolly Rails should be supported at least every 5 feet so that the weight of the system does not cause flexing of the rails. The Shuttle Dolly Basic Center Rail Support has ¼”-20 and ⅜”-16 threaded holes for connecting it to a support stand such as a tripod, light stand, etc. The support is placed under the rails so that the weight of the system is supported and your camera moves are rock solid.
Shuttle Dolly Deluxe Center Rail Support
These are an upgrade from the Basic Supports as they have two adjustable arms which cradle the rails so that your support stand does not have to be set up with the exact same angles as your Shuttle Dolly End Clamps.
Shuttle Dolly Center Rail Ground Support
Shuttle Dolly Rails should be supported at least every 5ft of rail length so that the weight of the system does not cause flexing of the rails. The Shuttle Dolly Center Rail Ground Supports feature two built-in adjustable feet to allow for leveling of the rails and multiple ¼”-20 and ⅜”-16 threaded holes to allow the support to also be used on stands or for accessories to be mounted.