Post

3 followers Follow
0
Avatar

Second Shooter Plus pan drifting

Got our new plus version and already have a major issue. The slider and tilt are working as before, but the pan is way out. When I program a couple keys and set to loop, it gets into position but imideatly the pan is to the right a few degrees. The second loop it drifts even more and so on. It will eventually make a full turn around. I've swapped cables. Ran off the mains instead of battery. No difference. Software is 0.4.2.0

Richard Griebno

Official comment

Avatar

Hi Richard,

Please update your firmware on the controller to the most recent version V4.4.1 and if you are still experiencing this issue afterwards please reach out to us at support@kesslercrane.com so that we can troubleshoot this more thoroughly.

The firmware for SS+ can be found here:
http://support.kesslercrane.com/hc/en-us/articles/210073366-Second-Shooter-Plus-Firmware-V0-4-4-1-Current-Release-

Tim Hiatt

Please sign in to leave a comment.

4 comments

0
Avatar

Thanks for your help in troubleshooting this issue. Sad but it didn't help at all. It seems that it really struggles to turn right but over compensates to the left. Good news is Kos is working great. Only problem...same issue with the pan going way out.

Richard Griebno 0 votes
0
Avatar

So I set up the Second Shooter Plus to record what is happening and programed a 2 key loop. WHAT?? Now it hits the mark. So now I'm confused because I haven't seen it work properly since we got the Plus. Even after updating the firmware last night. So I when through swapping cables again and it's still good. Now that it's working with Wifi, I'm going through it's pace. I'm still going through all its settings to make sure I have no issues on a shoot. So far so good. "?" Anyway, I'll post later how it goes.

Richard Griebno 0 votes