The camera control cable is the interface between Kessler motion control systems and a photography camera to allow the motion control equipment to fire the camera's shutter for time-lapse and stop motion moves.
N3 Cable
Compatible with the following:
Canon: 7D series, 6D series, 5D series, 1D/1DX series, 50D, 40D, 30D, 20D, 10D, R5, 5DS R
DC0 Cable
Compatible with the following:
Nikon: D1 Series, D2 Series, D3 Series, D4, D800, D810, D850, D700, D500, D300, D300s, D200, N90, F5, F6, F100, F90, F90X, Z9
Fujifilm: S5 Pro, S3 Pro
Kodak: DCS-14n
DC1 Cable
Compatible with the following:
Nikon: DSLR D80, D70s, D70
DC2 Cable
Compatible with the following:
Nikon: DSLR D7100/D7000, D5100, D5000, D3100, D90,D3200,D600, Z5, Z7 II, Z6 II
E3 Cable
Compatible with the following:
Canon: PowerShot G10, G11
EOS 1000D, 300D, 350D, 400D, 450D, 500D (t1i), 550D (t2i), 600D (t3i), 650D (t4i), 700D (t5i), 750D (t6i), 800D (t7i), EOS 30, 33, 50, 300, 60D, 70D, EOS R, R6, 90D, T7, EOS RP
Pentax: K7, K10, K20, K100, K200
Fujifilm: H-X1, X-T3, X-T4
Samsung: GX-1L, GX-1S, GX-10, GX-20
Contax: 645, N1, NX, N Digital
S1 Cable
Compatible with the following:
Sony: DSLR α900, α850, α700, α550, α500, α450, α400, α350, α300, α200, α100
Konica Minolta: DIMAGE α200, α1, 9, 7Hi, 7i, 7, 5, 4, 3, DYNAX 7D, 5D
RS1 Cable
Compatible with the following:
Panasonic: DMC-FZ50, DMC-FZ50K, DMC-FZ50S, DMC-FZ30, DMC-FZ30K, DMC-FZ30S, DMC-FZ20, DMC-FZ20K, DMC-FZ20S, LC-1, L1, DMC-GH1, DMC-GH2, DMC-GH3, DMC-GH4, DMC-GH5, GH6
Leica: DIGILUX2, DIGILUX3
UC1 Cable
Compatible with the following:
Olympus: E620, E550, E520, E510, E450, E420, E410, E400, E300, E100, SP-570 UZ, SP-560 UZ, SP-550 UZ, SP-510 UZ, E-P1, E-P2
CB1 Cable
Compatible with the following:
Olympus: E1, E3, E10, E20, E30
S2 Cable
Compatible with the following:
Sony: Alpha a58, a77 II, a3000, a5000, a6000, a7, a7 II, a7 III, a7IV, a7R, a7R II, a7R III, a7S, a7S II, a7SIII, a1, DSC-RX1, RX1R, RX1R II, RX10, RX10 II, RX100 II, RX100 III, RX100 IV, HX50V, HX90V, HX300, HX400, HX400V