The camera control cable is the interface between the Camera Control Module and ORACLE Controller to a photography camera to allow the ORACLE to fire the camera's shutter for timelapse and stop motion moves.
The Camera Control Module is required for the intervalometer function as well as some other features of the ORACLE Controller.
These features include:
Manual Camera Remote Trigger
Intervalometer Trigger
Shoot-Move-Shoot Time Lapse
Stop Motion Mode
Bulb Mode (new with v2.0)
N3 Cable
Compatible with the following:
Canon: EOS 7D/5D Series/1D Series/50D/40D/20D/20/10D
DC0 Cable
Compatible with the following:
Nikon: D1 Series, D2 Series, D3 Series, D4, D800, D810, D700, D500, D300, D300s, D200, N90, F5, F6, F100, F90, F90X
Fujifilm: S5 Pro, S3 Pro
Kodak: DCS-14n
DC1 Cable
Compatible with the following:
Nikon: DSLR D80, D70s, D70
DC2 Cable
Compatible with the following:
Nikon: DSLR D90, D7000, D5000, D3000, D750
E3 Cable
Compatible with the following:
Canon: PowerShot G10, G11
EOS 1000D, 550D (T2i), 500D (T1i), 450D, 400D, 350D, 300D, EOS 30, 33, 50, 300, 60D, EOS R
Pentax: K7, K10, K20, K100, K200
Samsung: GX-1L, GX-1S, GX-10, GX-20
Contax: 645, N1, NX, N Digital
Fujifilm: H-X1
S1 Cable
Compatible with the following:
Sony: DSLR α900, α850, α700, α550, α500, α450, α400, α350, α300, α200, α100
Konica Minolta: DIMAGE α200, α1, 9, 7Hi, 7i, 7, 5, 4, 3, DYNAX 7D, 5D
RS1 Cable
Compatible with the following:
Panasonic: DMC-FZ50, DMC-FZ50K, DMC-FZ50S, DMC-FZ30, DMC-FZ30K, DMC-FZ30S, DMC-FZ20, DMC-FZ20K, DMC-FZ20S, LC-1, L1, DMC-GH1, DMC-GH2
Leica: DIGILUX2, DIGILUX3
UC1 Cable
Compatible with the following:
Olympus: E620, E550, E520, E510, E450, E420, E410, E400, E300, E100, SP-570 UZ, SP-560 UZ, SP-550 UZ, SP-510 UZ, E-P1, E-P2
CB1 Cable
Compatible with the following:
Olympus: E1, E3, E10, E20, E30
S2 Cable
Compatible with the following:
Olympus: Sony: A7, A7R, A7S, A7Sii, A7iii, A7Siii, A58, NEX-3NL, A3000, A5000, A6000, HX300, RX1R, RX10, RX100II