Second Shooter PRO Firmware V1.0.0.22

Release Date: February 11, 2021

NOTE: Apple computers with an M1 chip may see a warning on screen when the controller is connected to the computer.  You can click ignore on this message. 

DOWNLOAD FIRMWARE


Change Log
 

Release notes for Second Shooter firmware 1.0.0.22

-Various bug fixes and performance improvements.

 

 


UPDATING FIRMWARE ON SECOND SHOOTER

  1. Download and extract the attached zip file. 
  2. Plug in the power cord for the Second Shooter PRO controller.
  3. Plug the USB cord from Computer into the micro-USB port on the controller.
  4. Once system powers up, navigate to "Settings"
  5. In "Settings", find and select “Firmware Update”, the controller will display “Firmware Update Ready…”
  6. The controller will show up as a USB device on your computer titled 2ndShooter
  7. Go to the location where you extracted 2ndShooter.img
  8. Click and Drag SecondShooterPRO.img to the USB device titled 2ndShooter and release.
  9. The system is now updating. The Controller’s screen will detail the update process and ask you to reboot the controller.
  10. Select "Reboot". The controller will reboot itself.
  11. As the system restarts, confirm the splash screen shows the new firmware number across the bottom.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments