CineShooter Firmware V1.0.0.24

Release Date: February 11, 2021

NOTE: Apple computers with an M1 chip may see a warning on screen when the controller is connected to the computer.  You can click ignore on this message. 


Change Log

Release notes for CineShooter firmware

-Various bug fixes and performance improvements.




  1. Download and extract the attached zip file. 
  2. Plug in the power cord for the CineShooter.
  3. Plug the USB cord from Computer into the USB C port on the Cineshooter.
  4. Once system powers up, navigate to "Settings"
  5. In "Settings", find and select “Firmware Update”, the controller will display “Firmware Update Ready…”
  6. The CineShooter will show up as a USB device on your computer titled CINESHOOTER
  7. Go to the location where you extracted CineShooter.img
  8. Click and Drag CineShooter.img to the USB device titled CINESHOOTER and release.
  9. The system is now updating. The CineShooter's screen will detail the update process and ask you to reboot.
  10. Select "Reboot". The CineShooter will reboot itself.
  11. As the system restarts, confirm the splash screen shows the new firmware number across the bottom.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request