Kwik Long Camera Plate (⅜”- 16)
Use this plate with the Kessler Kwik Release System for larger cameras or when greater adjustability is needed to slide the camera forward and back in the receiver for achieving proper balance. Includes ¼”-20 and ⅜”-16 camera screws.
Kwik Short Camera Plate (⅜”-16)
Use this plate with the Kessler Kwik Release System for small to mid-sized cameras or even mount accessories like monitors, microphones, lights, etc. via the many 1/4"-20 and 3/8"-16 thread holes. Includes ¼”-20 and ⅜”-16 camera screws.
Kwik Mini Plate
The Mini Plate is an ideal mounting option for both small cameras like mirrorless or DSLR bodies and the Kessler Pocket Jib Traveler, due to their small footprints. Small enough to avoid sticking out when packed, the Mini Plate is used in conjunction with the Kessler Kwik Release system for quick and easy mounting. Includes ¼”-20 camera screw.
K-Plate
The K-Plate is a camera plate that has built-in 15mm rod mounts allowing for accessories like FIZ motors to easily be installed and married to the camera. It also has built-in feet to allow for setting the camera down on a flat surface without worrying that it will fall over and additional ¼”-20 and ⅜”-16 mounting holes can be added for rigging more accessories to the side of your camera rig via the optional K-Plate Cheeseplate. Includes ¼”-20 and ⅜”-16 camera screws.
Kwik Stand
The Kwik Stand is a perfect camera plate for mid-sized camcorders or smaller cameras rigged out in cages, it features two camera screws ( a ¼”-20 and a ⅜”-16) for securing your camera to the plate and feet to allow for setting the camera down on a flat surface without worrying that it will fall over. Includes ¼”-20 and ⅜”-16 camera screws.
Kwik Stand Mini
The Kwik Stand Mini is an ideal mounting option for small cameras like mirrorless or DSLR bodies due to their small footprints. Small enough to avoid sticking out when packed, the Kwik Stand Mini is used in conjunction with the Kessler Kwik Release system for quick and easy mounting and features four feet to allow for the camera to be placed on a flat surface without worrying that it will fall over. Includes ¼”-20 and ⅜”-16 camera screws.
Kwik Stand XL
The Kwik Stand XL is a perfect camera plate for larger camcorders it features two camera screws ( a ¼”-20 and a ⅜”-16) for securing your camera to the plate and feet to allow for setting the camera down on a flat surface without worrying that it will fall over. Includes ¼”-20 and ⅜”-16 camera screws.