HOW-TO: Pan/Tilt Head Mounting Options

Kwik Release

Step 1 - 

Install the Kwik Release to the bottom of the Pan base by threading each camera screw (1/4"-20 and 3/8"-16) into the corresponding threaded hole.

 

Step 2 -

Install the Second Shooter onto any Kwik Release receiver.

 

 

Flat Mount Adapter

Step 1 -

Screw the Flat Mount Adapter into the larger (3/8"-16) threaded hole on the bottom of the Pan base.

 

Step 2 -

Install the Second Shooter onto any 3/8"-16 threaded hole.

 

 

 

Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request

Comments

  • Avatar
    Patrick Taber

    Step 2 of method 1: I was hoping you'd show how to get two mounting screws for the receiver into the cineslider carriage. No matter how I spin the plate, I can't seem to find two holes that line up at the same time.

  • Avatar
    Chris Beller

    Our manual for the Kwik Release shows how to mount the receiver to our sliders.

    http://support.kesslercrane.com/hc/en-us/articles/200511437-MANUAL-Kwik-Release

  • Avatar
    Alan

    I can't find any info on mounting the Kwik Release mount to the Shuttle Pod Mini cheese plate, is this possible or do I need to use a low profile ball mount in-between?