Release Date: July, 28 2016
Change Log
Firmware v0.3.7.5 (current release)
- Fixed bug found in v0.3.7.3 that could cause motor oscillation in pan axis
Firmware v0.3.7.3
- Required for Master / Slave mode compatibility with SS+
- Fixed potential motor runaway if a cable is disconnected
UPDATING FIRMWARE ON SECOND SHOOTER
- Download and extract the attached zip file. There are 4 files within the zip folder. The one you need is 2ndShooter.img
- Plug in the power cord for the Second Shooter controller.
- Plug the USB cord from Computer into the micro-USB port on the controller.
- Once system powers up, navigate to "Settings"
- In "Settings", find and select “Firmware Update”, the controller will display “Firmware Update Ready…”
- The controller will show up as a USB device on your computer titled 2ndShooter
- Go to the location where you extracted 2ndShooter.img
- Click and Drag 2ndShooter.img to the USB device titled 2ndShooter and release.
- The system is now updating. The Controller’s screen will detail the update process and ask you to reboot the controller.
- Select "Reboot". The controller will reboot itself.
- As the system restarts, confirm the splash screen shows the new firmware number across the bottom.