HOW-TO: CineDrive API Instructions

This document describes the network communications between a kOS motor control product (Device) and client control applications. Messages between the Device and clients are categorized as Get/Set Messages, Action Messages, or Notification Messages. Each message consists of a fixed header along with a payload containing 0 or more parameter values. Messages have a message type in the header that indicates whether they are intended to ‘Set’ a value on the Device or ‘Get’ a value from the Device. All messages from the Device to clients have a message type of ‘Response’.

This documentation is offered free of charge and without support.

If support is needed from our engineering/development staff to assist with your implementation, support hours will need to be pre-purchased. Rate is $150/hr and will be scheduled based on availability of our staff.

To request support from our engineering team open a support ticket at the link below or send an e-mail to support@kesslercrane.com.

http://www.kesslercrane.com/contact

Please include details around what assistance you need, so we will be able to estimate the support time that will be required.

If there is a question about the instruction document, or need any clarifications, please let us know.

The API is only for CineDrive at this time.

 

Document Last Updated: January 08, 2016

Download CineDrive Third Party Network Protocol Document

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk